HP 2311gt 23 inch Diagonal 3D LED Monitor - Manual (Page 29)

Icon Main Menu Options Sub-menu Options Description
Sleep Timer Provides the timer-adjustment menu
options:
● Set Current Time — Sets the
current time in hours and minutes.
● Set Sleep Time — Sets the time
you want to place the monitor in
sleep mode.
● Set On Time — Sets the time you
want the monitor to wake up from
sleep mode.
● Timer — Sets the Sleep Timer
feature on or off; the default setting
is Off.
● Sleep Now — Immediately sets the
monitor to enter sleep mode.
Language Selects the language in which the OSD
menu is displayed. The factory default is
English.
Information Selects and displays important
information about the monitor.
Current Settings Provides the current input video mode.
Recommended Settings Provides the recommended resolution
mode and refresh rate for the monitor.
Serial Number Reports the serial number of the
monitor. The serial number is needed if
contacting HP technical support.
FW Version Reports the firmware version of the
monitor.
Backlight Hours Reports the total hours of backlight
operation.
Service Support For service support, go to: www.hp.com/
support .
Factory Reset Returns settings to factory defaults.
Source Control Selects the video input signal. The
factory default by priority is DVI, VGA,
and then HDMI.
DVI Selects DVI as the video input signal.
HDMI Selects HDMI as the video input signal.
VGA Selects VGA as the video input signal.
Default Source Selects the default or primary video
input signal when the monitor is
connected to two active and valid video
sources. The monitor will automatically
determine the video format.
ENWW Using the On-Screen Display (OSD) 21