HP 3PAR Application Software Suite for VMware User Manual
Page 64
After you click Next and review the summary before initiating the provisioning operation.
Figure 50 Raw Disk Parameters Review
7.
Review the parameters, then click Create. Click OK for each confirmation. A confirmation is
eventually shown indicating that the Datastores have been created.
NOTE:
If you choose “ESX Cluster”, the storage is assigned to the ESX Cluster hosts. Otherwise,
the storage is only created on the selected host.
NOTE:
If the selected ESX(i) host is connected to a storage system and currently does not have
LUNs exposed to the host, you need to log in to the summary page and create an entry for the
storage system. For more information, refer to
“HP 3PAR StoreServ Storage System Login” (page
.
64
Logging On and Working with Virtual Volumes