HP ProLiant Support Pack - Manual (Page 26)

Troubleshooting 26
Ports 61000-61007 These ports are used to communicate from the target server to the system
running HP SUM. The same mechanism is used by the remote access code as
the 60000 ports, with the first trial port as 61000. The upper limit might not be
61007 when a conflict occurs.
In the case of IPv4-only and one NIC, the lowest available port is used by HP
SUM to pass information between processes on the local workstation where HP
SUM is executed, and the next available port is used to receive messages from
remote servers.
Port 62286 This port is the default for some internal communications. This port is listening on
the remote side if a conflict does not exist. If a conflict occurs, the next available
port is used.
Ports 80 or 63000-
63005 The logs are passed to the target, and the logs are retrieved using an internal
secure web server that uses port 80 (if available) or a random port between
63000 and 63005, if port 80 is not available.
This support enables updates of the iLO firmware without the need to access the
host server and enables servers running VMware or other virtualization
platforms to update their iLO without rebooting their server or migrating their
virtual machines to other servers.