HP Designjet T1300 ePrinter User Manual
Page 112
Advertising
7.
In the Paper/Quality tab, check the Show preview before printing box, and select the
paper type that you intend to use.
NOTE:
If you select neither the paper source nor the paper type, the printer will not print on any
protected roll (see
Roll protection (T1300 series) on page 67
8.
Select the print quality (your own choice between speed and quality of printing).
9.
If you intend to print on roll paper, you must decide where the printer should cut the paper. Press
the Margins/Layout button and select Clip contents by margins.
104
Chapter 11 Practical printing examples
ENWW
Advertising
This manual is related to the following products: