HP Designjet T1300 ePrinter - Manual (Page 136)

Insert an ink cartridge
1. Before removing the cartridge from its wrapping, shake it vigorously.
2. Unwrap the new ink cartridge, find the label identifying the ink color. Check that the letter or
letters (in these illustrations, M for magenta) marking the empty slot, matches the letter or letters on
the cartridge label.
3. Insert the ink cartridge into its slot.
4. Push the cartridge into the slot until it snaps into position. You should hear a beep and see
confirmation that the cartridge has been inserted.
If you have difficulty, see Cannot insert an ink cartridge on page 183 .
5. When all cartridges have been inserted, close the cover.
6. The front-panel display confirms that all cartridges have been correctly inserted.
128 Chapter 13 Handling ink cartridges and printheads ENWW