HP Designjet T1300 ePrinter - Manual (Page 171)

4. Select the percentage of change from –100% to +100%. To correct light banding, decrease the
percentage.
To correct dark banding, increase the percentage.
5. Press OK on the front panel, to save the value.
6. Wait until the front panel displays the status screen and reprint your print.
Return to default calibration
Returning to the default calibration sets all the corrections made by the paper advance calibration to
zero. To return to the default paper advance calibration value, you must reset the calibration.
1.
From the front panel, press , then , then Image Quality Maintenance > Paper
advance calibration > Reset paper advance.
2. Wait until the front panel displays the operation has completed successfully.
ENWW Recalibrate the paper advance 163