Front-panel error messages, 20 front-panel error messages, Us, see – HP Designjet T1300 ePrinter User Manual

Page 204

Advertising
background image

20 Front-panel error messages

Occasionally you may see one of the following messages appear on the front-panel display. If so,

please follow the advice in the Recommendation column.

If you see an error message that does not appear here, and you feel in doubt about the correct

response, or if the recommended action does not seem to solve the problem, contact HP Support. See

Contact HP Support on page 203

.

Table 20-1

Text messages

Message

Recommendation

[Color] cartridge altered

Check the cartridge.

[Color] cartridge has expired

Replace the cartridge. See

Handling ink cartridges and

printheads on page 125

.

[Color] cartridge is low on ink

Ensure that you have a new cartridge of the same color
ready.

[Color] cartridge is missing

Insert a cartridge of the correct color. See

Handling ink

cartridges and printheads on page 125

.

[Color] cartridge is out of ink

Replace the cartridge. See

Handling ink cartridges and

printheads on page 125

.

[Color] cartridge is very low on ink

Ensure that you have a new cartridge of the same color
ready.

[Color] printhead #[n] error: not present

Insert the correct printhead. See

Handling ink cartridges and

printheads on page 125

.

[Color] printhead #[n] error: please remove

Remove the incorrect printhead and insert a new printhead of
the correct type (color and number). See

Handling ink

cartridges and printheads on page 125

.

[Color] printhead #[n] error: replace

Remove the non-functional printhead and insert a new
printhead of the correct type (color and number). See

Handling ink cartridges and printheads on page 125

.

[Color] printhead #[n] error: reseat

Remove and reinsert the same printhead, or try cleaning the
electrical connections. If necessary, insert a new printhead.
See

The front-panel display recommends reseating or

replacing a printhead on page 183

.

Cutter replacement advised

Contact HP Support to replace the cutter. See

Contact HP

Support on page 203

.

Job queue notification

Cancel, resume or delete the job. See

Job queue management

(T790 PS and T1300 series) on page 77

.

Maintenance #1 advised

Contact HP Support. See

Contact HP Support on page 203

.

Maintenance #2 advised

Contact HP Support. See

Contact HP Support on page 203

.

196

Chapter 20 Front-panel error messages

ENWW

Advertising
This manual is related to the following products: