HP Designjet T1300 ePrinter - Manual (Page 215)

* For a list of supported glossy papers, see Order paper on page 142 .
Table 22-4 Margins
Top, right and left margins 5 mm (0.2 in)
Bottom margin (trailing edge) 5 mm (0.2 in) (roll)
17 mm (0.67 in) (sheet)
Table 22-5 Mechanical accuracy
±0.1% of the specified vector length or ±0.2 mm (whichever is greater) at 23°C (73°F), 50-60% relative humidity, on E/A0
printing material in Best or Normal mode with HP Matte Film roll feed.
Table 22-6 Graphic languages supported
HP Designjet Languages
T790 HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG
T790 PS HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, Adobe PDF 1.7, Adobe PostScript 3
T1300 HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG
T1300 PS HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, Adobe PDF 1.7, Adobe PostScript 3
Physical specifications
Table 22-7 Printer physical specifications
HP Designjet T790 24-in series HP Designjet T790 44-in series HP Designjet T1300 series
Weight 60 kg (132 lb) 81.6 kg (180 lb) 86 kg (189 lb)
Width 1262 mm (49.7 in) 1770 mm (69.7 in) 1770 mm (69.7 in)
Depth Minimum: 692 mm (27.2 in)
Maximum: 702 mm (27.6 in)
Minimum: 692 mm (27.2 in)
Maximum: 701 mm (27.6 in)
Minimum: 692 mm (27.2 in)
Maximum: 721 mm (28.4 in)
Height 1050 mm (41.3 in) 1050 mm (41.3 in) 1050 mm (41.3 in)
The depth is measured without the upper spindle; wall spacers up; ink cover opened; roll covers and
basket closed.
ENWW Physical specifications 207