Uninstall the printer software (windows), Bonjour connection – HP Designjet T1300 ePrinter User Manual
Page 27
Uninstall the printer software (Windows)
1.
Insert the HP Start-up Kit DVD into your DVD drive. If the DVD does not start automatically, run the
setup.exe program in the root folder of the DVD.
2.
Press the Software Installation button.
3.
Press the Modify Installation button, and follow the instructions on your screen to uninstall the
printer software.
Connect a computer to the printer by network (Mac
OS)
You can connect your printer to a network under Mac OS X by using the following methods:
●
Bonjour
●
TCP/IP
NOTE:
The printer does not support AppleTalk.
The following instructions apply if you intend to print from software applications using a printer driver.
for alternative ways of printing.
Before you begin, check your equipment:
●
The printer should be set up and on.
●
The Ethernet switch or router should be on and functioning correctly.
●
The printer and the computer should be connected to the network (see
).
Now you can proceed to install the printer software and connect to your printer.
Bonjour connection
1.
Go to the front panel and press
, then
, then
. Note the mDNS service name of
your printer.
2.
Insert the HP Start-up Kit DVD into your DVD drive.
3.
Open the DVD icon on your desktop.
4.
Open the Mac OS X HP Designjet Installer.
5.
Follow the instructions on your screen.
6.
The printer software is installed, including the printer driver and other HP software, such as the HP
Utility, HP Designjet Preview, and connections to HP Designjet ePrint & Share.
HP Designjet ePrint & Share allows you to create a copy of your document any time you print,
securely in the cloud, in your private online print history. This means that you can reprint your
documents from anywhere. To use HP Designjet ePrint & Share, you must create a password-
protected account to protect your documents.
ENWW
Uninstall the printer software (Windows)
19