HP Designjet T1300 ePrinter - Manual (Page 65)

● On the Embedded Web Server's Submit Job page (T1300 series): select Advanced
settings > Paper > Page size > Standard.
● Using the front panel: press , then , then Setup > Printing preferences >
Paper options > Select paper size.
NOTE: If the paper size is set from your computer, it overrides the paper size setting in the front
panel.
Custom paper sizes
If you want to choose a paper size that is not included in the list of standard paper sizes, there are
various different ways to specify it.
Use the Windows printer driver
1. Select the Paper/Quality tab.
2. Press the Custom button.
3. Enter the name and dimensions of your new paper size.
4. Press OK. The new paper size is automatically selected.
A custom paper size created in this way has the following characteristics:
● The paper size is permanent. It will not disappear if the driver is closed or the computer is turned
off.
● The paper size is local to the printer queue. It will not be seen from other printer queues in the
same computer.
● In Domain server networks, the paper size is local to the computer. It will not be seen from other
computers sharing the printer queue.
● In Workgroup networks, the paper size will be shared among all the computers sharing the printer
queue.
● If the printer queue is deleted, the paper size is deleted with it.
Use Windows forms
1. From the Start menu, or from the Control Panel, select Printers and Faxes.
2. From the File menu, select Server Properties.
3. In the Forms tab, check the Create a new form box.
4. Enter the name and dimensions of your new paper size. Leave the margins as 0.00.
5. Press the Save Form button.
6. Go to the printer driver, and select the Paper/Quality tab.
7. Select More… from the drop-down list of paper sizes.
8. Select your new paper size from the group of Custom sizes.
ENWW Advanced print settings 57