HP Designjet T1300 ePrinter - Manual (Page 73)

◦ In the Mac OS PostScript Print dialog (PostScript printers): select the Finishing
panel, then Remove Top/Bottom Blank Areas and/or Rotate by 90 degrees.
◦ On the Embedded Web Server's Submit Job page (T1300 series): select
Advanced settings > Roll options > Remove top/bottom blank areas and/or
Rotate.
● If you check the print preview on your computer before printing, you can sometimes avoid wasting
paper on prints containing obvious mistakes. See Preview a print on page 61 .
Nest jobs to save roll paper (T1300 series)
Nesting means automatically printing images or document pages side by side on the paper, rather than
one after the other. This is done to avoid wasting paper.
1. Direction of paper flow
2. Nesting off
3. Nesting on
4. Paper saved by nesting
When does the printer try to nest pages?
When both of the following are true:
● The printer is loaded with roll paper, not sheet paper.
● The printer's Nest option is turned on. See Turn nesting on and off (T1300 series) on page 27 .
What pages can be nested?
All pages can be nested, unless they are so large that two of them cannot fit side by side on the roll, or
unless there are too many of them to fit into the remaining length of the roll. A single group of nested
pages cannot be split between two rolls.
Which pages qualify for nesting?
In order to be in the same nest, the individual pages must be compatible in all of the following ways:
● All pages must have the same print quality setting (Economode, Fast, Normal or Best).
● The Maximum Detail setting must be the same on all pages.
● The Layout/Margins setting must be the same for all pages.
ENWW Advanced print settings 65