HP ep9012 Digital Projector - Manual (Page 41)

Playing DVDs and CDs
User’s Guide 41
2. Press the DVD eject button on the projector or remote control to open the
tray.
3. Place the CD on the tray.
4. Press the DVD eject button again to close the tray.
The projector selects the internal DVD player as the active source and begins
playing the first track. If the lamp is on, the projector shows the list of songs
on the CD.
5. Press the buttons shown in the following table to control the songs. If the
lamp is off, some controls are not applicable.
6. Press the DVD eject button to open the tray and remove the CD, then
press it again to close the tray.
To do this... Press this...
Play a song from the list Up or down to highlight the song
and then ok.
Skip to next song Next button.
Skip to start of current song Previous button.
Skip to previous song Previous button two times.
Pause the music Play/pause button.
Resume playing music Play/pause button.
Stop playing Stop button.
Stop playing, go to track 1 Stop button two times.
Mute the sound mute button.
Hide the list, pause the music hide button. Press any button to
resume.
Play at fast speeds Right one or more times. Press
play/pause for normal speed.
Play backwards at fast speeds Left one or more times. Press
play/pause for normal speed.