HP ProLiant ML110 G6 Server - Manual (Page 19)

Hardware options installation 19
8. Connect the data and power cables.
9. Connect the cables to the system board or to an expansion board, as directed by the option
documentation.
10. Slide the server back into the rack.
11. Install the access panel.
12. Install the tower bezel.
13. Power up the server (on page 7 ).
Removable media device option (ML150 G6 servers)
This process represents only one installation method. For instructions for installing the media device into a
specific server, see the installation sheet that ships with the server or the HP website
(
http://www.hp.com/go/bizsupport ).
To install the component:
1. Power down the server (on page 7 ).
2. Do one of the following:
o Unlock and remove the bezel (" Remove the tower bezel (ML150 G6 servers) " on page 8 ).
o Extend the server from the rack.
3. Remove the access panel (on page 7 ).