Product security features – HP LaserJet Pro M701 Printer series User Manual
Page 59
Product security features
The product supports security standards and recommended protocols that help you keep the product secure,
protect critical information on your network, and simplify the way you monitor and maintain the product.
For in-depth information about HP's secure imaging and printing solutions, visit
Set or change the product password using the HP Embedded Web Server
Use the HP Embedded Web Server to set a password or change an existing password for a product on a
network.
1.
Print a configuration page, and locate the IP address.
a.
On the control panel, press the
OK
button.
b.
Scroll to the Reports menu, and then press the
OK
button.
c.
Scroll to the Configuration Report, and then press the
OK
button to print the report.
2.
Open a Web browser, and in the address line, type the IP address exactly as it displays on the product
control panel. Press the
Enter
key on the computer keyboard. The EWS opens.
3.
Click the System tab, and click either the Product Security or the Administration link.
NOTE:
If a password has previously been set, you are prompted to provide the password. Enter the
password, and then click the Apply button.
4.
Enter the new password in the Password box and in the Confirm Password box.
5.
At the bottom of the window, click the Apply button to save the password.
NOTE:
For products connected with a USB cable to a Windows computer, use the HP Device Toolbox to
change the product password:
1.
Click the Start button, and then click the Programs item.
2.
Click your HP product group, and then click the HP Device Toolbox item.
3.
Click the System tab.
4.
Click Administration, and locate the area to change the password.
ENWW
Product security features
51