HP LaserJet Pro M701 Printer series - Manual (Page 88)

4. Select a type from the Media Type drop-down list.
5. Click the Print button.
Check the toner-cartridge status
Check the supplies status page for the following information:
● Estimated percentage of cartridge life remaining
● Approximate pages remaining
● Part numbers for HP toner cartridges
● Number of pages printed
Use the following procedure to print the supplies status page:
1. On the product control panel, press the OK button.
2. Scroll to the Reports menu, and press the OK button.
3. Scroll to the Supplies Status option, and then press the OK button to print a report of the status of all
supply items.
4. Check the percent of life remaining for the toner cartridge and if applicable, the status of other
replaceable maintenance parts.
Print quality problems can occur when using a toner cartridge that is at its estimated end of life. The
supplies status page indicates when a supply level is very low. After an HP supply has reached the very
low threshold, HP’s premium protection warranty on that supply has ended.
The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable.
Consider having a replacement available to install when print quality is no longer acceptable.
If a toner cartridge or other replaceable maintenance part needs to be replaced, the supplies status
page lists the genuine HP part numbers.
5. Check to see if a genuine HP cartridge is installed.
A genuine HP toner cartridge has the words “HP” or “Hewlett-Packard” on it, or has the HP logo on it.
For more information on identifying HP cartridges go to www.hp.com/go/learnaboutsupplies .
Hewlett-Packard cannot recommend the use of non-HP supplies, either new or remanufactured.
Because they are not HP products, HP cannot influence their design or control their quality. If you are
using a refilled or remanufactured toner cartridge and are not satisfied with the print quality, replace
the toner cartridge with a genuine HP toner cartridge.
Print a cleaning page
During the printing process paper, toner, and dust particles can accumulate inside the product and can cause
print-quality issues such as toner specks or spatter, smears, streaks, lines, or repeating marks.
Follow these steps to clean the product's paper path.
80 Chapter 6 Solve problems ENWW