Hardware options installation, Introduction, Hard drive option – HP ProLiant xw460c Blade Workstation User Manual
Page 20
Hardware options installation 20
Hardware options installation
In this section
Introduction ........................................................................................................................................... 20
Hard drive option................................................................................................................................... 20
Processor option..................................................................................................................................... 21
Memory options..................................................................................................................................... 28
Mezzanine card option........................................................................................................................... 31
Smart Array E200i Battery-Backed Write Cache enabler option .................................................................. 33
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
Hard drive option
The server blade supports up to two SAS or SATA drives.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the
enclosure unless all hard drive and device bays are populated with either a component or a blank.
1.
Remove the hard drive blank.