HP LaserJet 4100 Multifunction Printer series - Manual (Page 85)

Clearing jams 83
Clearing jams from the fuser area
Use this procedure to remove jams from the fuser area:
● when media has jammed inside the fuser and cannot
otherwise be removed.
● when a page has torn while you were trying to clear a jam
from the fuser.
1 Turn the product off.
WARNING!
To avoid minor burns, wait 30 minutes for the fuser to cool
before continuing with this procedure.
2 Turn the product so its rear cover faces you and remove the
Tray 2 dust cover or optional duplexer.
3 Unplug the power cord from the product.
4 Open the rear output slot and pull the extension out until it
stops.
5 Remove the rear output slot and extension. To do this, bend
the middle down slightly, release tab a, and then release tab
b.
6 Unlock the fuser by rotating the blue fuser levers so that
they point up.
7 Pull the fuser out of the product. To release the fuser from
the product, hold the back of the product while pulling on
the fuser. Do not pull on the black plastic flapper.
Continued on the next page.
2
3
4
5
6
7
a
b