Asus Motherboard P5ND2 - Manual (Page 84)

2-3 Chapter 2: BIOS setup
2.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press <Enter> to display
the configuration options.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Hardware Monitor
Q-Fan Controller [ Disabled ]
Vcore Voltage [ 1.50V]
3.3V Voltage [ 3.31V]
5V Voltage [ 4.94V]
12V Voltage [ 11.26V]
CPU Temperature 48ºC
M/B Temperature 38ºC
CPU FAN Speed 4962 RPM
PWR FAN Speed 0 RPM
CHA FAN1 Speed 0 RPM
CPU Fan Speed warning [800 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
Q-Fan Controller [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, +2V Voltage, 3.3V Voltage, 5VCC
Voltage
The onboard hardware monitor automatically detects the voltage
output through the onboard voltage regulators. These items are not
user-configurable.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed, PWR Fan Speed, CHA Fan Speed
The onboard hardware monitor automatically detects and displays the CPU,
Power, and Chassis fan speeds in rotations per minute (RPM). If the fan is
not connected to the motherboard, the field shows 0. These items are not
user-configurable.
CPU Fan Speed warning [800 RPM]
Allows you to set the CPU fan warning speed.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]