HP Integrity rx5670 Server - Manual (Page 21)

Note:
Login accounts, which have Administrator or Operator privileges defined in the
SMH, can access all features of the VCA.
Logging into the VCA
To log into the VCA:
1. To access the VCA with access to all available features, you must log into the SMH with
administrator
or operator level access.
2. Navigate to https://hostname:2381. The Login page appears if Anonymous Access
is disabled. If Anonymous Access is enabled, the SMH page appears.
3. After you have logged in, you can browse directly to the VCA by entering
https://hostname:2381/vcagent
in the browser address field, or you can open it in
a new browser window by clicking the HP Version Control Agent link from the SMH under
Integrated Agents
, or in the Version Control status box on the Home tab. The VCA page
appears.
Related topics
● Getting started
● Logging out
Logging out
Logging out of the HP Version Control Agent
You are logged out automatically from the System Management Homepage and HP Version Control
Agent after approximately 15 minutes of inactivity.
To log out:
1. Browse to the VCA. You can click the servername Homepage link on the VCA banner.
2. Click the logout link in the upper right corner.
3. Close the web browser.
Related topics
● Logging in
21
Getting started