HP LP2065 20-inch LCD Monitor - Manual (Page 30)

Table 4-2 OSD Menu
Icon Main Menu Submenu Description
Brightness Adjusts the brightness level of the screen. The factory default
range is 50 or 90, depending on the model.
Contrast Adjustable scale Adjusts the contrast level of the screen. The factory default range
is 80.
Image Control Adjusts the screen image.
Auto Adjustment Automatically adjusts the screen image.
Horizontal Position Adjusts the position of the screen image left and right.
Vertical Position Adjusts the position of the screen image up and down.
Custom Scaling (not
available on LP1965
model) Selects the method on how displayed information on the monitor
will be formatted. Select:
● Fill to Screen—image fills the entire screen and may look
distorted or elongated because of non-proportional scaling
of height and width
● Fill to Aspect Ratio—image is sized to fit the screen and
maintains proportional image
● One-to-one—disables video scaling, displays an image that
is smaller in size than the monitor’s capability and centers
the image on the screen in the active viewing area
Sharpness (not available
on LP1965 model) Adjusts the screen image to look sharper or soft.
NOTE: If the one-to-one custom scaling menu is selected,
scaling is disabled and the sharpness feature will also be disabled.
Clock Minimizes any vertical bars or strips visible on the screen
background. Adjusting the Clock will also change the horizontal
screen image.
Clock Phase Adjusts the focus of the display. This adjustment allows you to
remove any horizontal noise and clear or sharpen the image of
characters.
Color Selects the screen color. The factory default is 6500K or Custom
Color, depending on the model.
9300 K Changes to slightly blueish white.
6500 K Changes to slightly reddish white.
Custom Color Selects and adjusts your own color scales:
● R—sets your own red color levels
● G—sets your own green color levels
● B—sets your own blue color levels
sRGB Sets your screen colors to adapt to the color standards used in the
image technology industry.
Language Selects the language in which the OSD menu is displayed. The
factory default is English.
22 Chapter 4 Operating the Monitor ENWW