HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 40)

Command line 40
Item Description
[MaxSpeedType=<UnRestricted|Custom>] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
Parameter
NetworkName
(required)
The name of an existing network to modify
Option
Quiet (optional) Suppresses user confirmation prompts during network creation and modification. This
option is used mainly in automated scripting scenarios.
Properties
Name (optional) The new name of the network
State (optional) Enables or disables the network. Valid values are "Enabled" and "Disabled".
SmartLink
(optional)
Enables or disables the SmartLink capability for a port. Valid values include "Enabled"
and "Disabled".
SmartLink cannot be modified unless one or more ports are added to the network.
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be configured only
if it is applied to a shared network.
Private
(optional)
Enables or disables the network to act as a private network. Valid values are "Enabled"
and "Disabled". The default value is "Disabled".
VLanID (optional) Modifies the VLAN ID of the network if it belongs to a shared uplink set that has not
been configured.
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
network. Valid values include "Auto" and "Failover". The default value is "Auto".
VLanTunnel
(optional)
Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through the
domain without any modification. If disabled, all tagged frames are discarded.
If multiple networks are configured on any server port, this option cannot be modified.
PrefSpeedType
(Optional)
Default connection speed for any Ethernet connection attached to this network. Valid
values include "Auto" and "Custom". "Custom" enables the user to configure the
preferred speed. The default value is "Auto".
PrefSpeed
(Required if
PrefSpeedType is
'Custom')
The connection speed for any Ethernet connection attached to this network. Valid
values range from 100Mb to 10Gb in 100Mb increments.
MaxSpeedType
(Optional)
Maximum connection speed for any Ethernet connection attached to this network. Valid
values include "Unrestricted" and "Custom". "Custom" enables the user to configure
the preferred speed. The default value is "Unrestricted".
MaxSpeed
(required if
MaxSpeedType is
"Custom)
The maximum connection speed for any Ethernet connection attached to this network.
Valid values range from 100Mb to 10Gb in 100Mb increments.
Examples
->set network MyNetwork State=Disabled
Disables an existing network named "MyNetwork"
->set network Blue Name=Red
Changes the name of an existing network from "Blue" to "Red"
->set network GreenNetwork SmartLink=Enabled
Enables the SmartLink feature on a specific network
->set network network1 NativeVLAN=Disabled
Disables the network native VLAN tagging
->set network network1 Private=Disabled
Disables the private network property