Laser safety warning, Certification and classification information, Laser product label – HP 2000fc Modular Smart Array User Manual

Page 66

Advertising
background image

66

HP 2012fc Modular Smart Array user guide • January 2013

Laser Safety Warning

Warning –

To reduce the risk of exposure to hazardous radiation:

Do not try to open the laser device enclosure. There are no user-serviceable
components inside.

Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.

Allow only HP authorized service technicians to repair the laser device.

Certification and Classification Information

This product contains a laser internal to the fiber optic (FO) transceiver for
connection to the Fibre Channel communications port.

In the USA, the FO transceiver is certified as a Class 1 laser product conforming to
the requirements contained in the Department of Health and Human Services
(DHHS) regulation 21 CFR, Subchapter J. A label on the plastic FO transceiver
housing indicates the certification.

Outside the USA, the FO transceiver is certified as a Class 1 laser product
conforming to the requirements contained in IEC 825-1:1993 and EN 60825-1:1994,
including Amendment 11:1996 and Amendment 2:2001.

Laser Product Label

The optional label in Figure 4-1 or equivalent may be located on the surface of the
HP supplied laser device.

Figure 4-1 Class 1 Laser Product Label

This optional label indicates that the product is classified as a
CLASS 1 LASER PRODUCT. This label may appear on the laser
device installed in your product.

Advertising
This manual is related to the following products: