HP 2000fc Modular Smart Array - Manual (Page 53)

Chapter 4 Configuring a System for the First Time 53
9. In the host computer's command window, type the following command to verify
Ethernet connectivity, first for controller A and then for controller B:
If you cannot your access your system for at least three minutes after changing
the IP address, your network might require you to restart the management
controller using the serial CLI. When you restart a management controller,
communication with it is temporarily lost until it successfully restarts.
Type the following command to restart the management controller on both
controllers:
Configuring Your Web Browser for SMU
Before using SMU to perform remaining steps, ensure that your web browser is
properly configured according to the following guidelines:
■ Use one of the following browsers:
■
Microsoft Internet Explorer 5.5 or later
■ Mozilla Firefox 1.0.7 or later
■ Because SMU uses popup windows to indicate the progress of user-requested
tasks, disable any browser features or tools that block popup windows.
■ For optimal performance, set your browser to use stored (cached) web pages.
Note – Changing your browser cache setting might affect other sites you visit with
your browser.
■ To optimize display, use a color monitor and set its color quality to the highest
setting.
■ For Internet Explorer, to ensure you can navigate beyond SMU login page, set
the local-intranet security option to medium or medium-low.
ping IP-address
restart mc both