AMC CD8b User Manual
Page 8
h) To clear the program memory, press
to open the drawer or
simply switch off the power.
This button will allow two different types of
endless play modes.
Press the
button once, the word
will appear on the display
and the selected track will be repeated
endlessly until the
button is
pressed.
Press the
button a second time,
the word
will appear and the
entire disc will repeat until the
button
in pressed.
Press the
button a third time or
press the
button to cancel
REPEAT mode. The display and operation
will return to normal.
The TIME button will cycle the time display
through three different modes.
a. TIME: the elapsed time since the
beginning of the current track, in minutes
and seconds. ( This is the "default" setting,
selected automatically when the player is
turned on).
b. REMAIN: (track number displayed):
shows the total playing time that remains till
the end of the current track.
c. REMAIN: (track number blank): The total
playing time that remains till the end of the
disc. During program play, the remaining
time of the program is shown. During
program entry, the TIME button displays
the total playing time of the tracks in the
program.
Press and hold
(<< or >>) to find
a desired starting point or a certain
part of a track. When the
button
is pressed and held during playback
the output level will be automatically
attenuated by 12dB.
Press
(< or >) to find a desired
track. Track number is displayed.
When loading a disc and using the
OPEN/CLOSE button to close the disc
drawer, the TOC (Table of Contents) of the
disc will be read and the display will show
the number of tracks and the total playing
time of all of he tracks on the disc. During
play, the following information is displayed:
These track numbers are identified on the
CD package and are encoded in the
disc by the manufacturer.
Shows in minutes and seconds the time
elapsed in the music since the
beginning of the current track. Pressing
the TIME button will display the time
remaining until the end of the current track
or the playing time remaining until the
end of the disc.
>
glows to indicate disc is
playing.
II
glows to indicate that a disc
cannot be read.
REPEAT 1
glows during repeat play of a
single track.
REPEAT ALL glows during repeat play of
the entire disc.
REPEAT AB glows during repeat play
from point A to point B.
REMAIN
glows to indicate number of
tracks on disc being loaded
or the tracks that have been
programmed into memory.
The number of the track that
is playing will flash.
OVER
glows when the disc
contains more than 16
tracks.
OPEN/CLOSE
7. REPEAT
REPEAT
REPEAT 1
STOP
REPEAT
REPEAT ALL
STOP
REPEAT
STOP
8. TIME
9. SEARCH
SEARCH
SEARCH
10. TRACK
TRACK
11. DISPLAY
Track Number
Time
Status
Explanation
7