Adder Technology ALGTX/ALGRX - Manual (Page 26)

AdderLink Installation and Use Page 25
You should now see a ‘fuzzy’ video picture on your monitor connected to the XR
receiver unit.
STEP 3
You may now use the following keys to select the required video compensation.
g g
Selects no video compensation.
{ {
Increases the video compensation (coarse adjustment).
w w
Increases the video compensation (fine adjustment).
} }
Decreases the video compensation (coarse adjustment).
y y
Decreases the video compensation (fine adjustment).
Various other keys may also be used to select operating options (see section 2.10)
As you change the video compensation setting you will see the sharpness of the
picture change. The AdderLink calculates the required brightness automatically. You
will need more video compensation for longer twisted pair cable distances. Adjust
the video compensation until you achieve the best picture. If you add too much
compensation then the picture may be lost. If this happens reduce the compensation
to restore the picture.