HP Photosmart 422 Portable Photo Studio - Manual (Page 39)

2. Remove the camera from the camera dock and close the camera dock door.
3. Remove all paper from the In and Output trays, close the Output tray, and then
close the In tray.
Note Make sure the printer completes its power-down cycle before you
unplug the power cord. This allows the printer to store the print cartridge
properly.
4. Unplug the power cord.
5. If the printer is connected to a computer, disconnect the USB cable from the
computer.
6. Always carry the printer upright.
Note Do not remove the print cartridge when transporting the printer.
Tip The HP Photosmart GoGo Photo Studio has a convenient built-in
handle you can use to make the printer easier to carry. Extend the handle
by lifting it up from above the camera dock door. Do not shake or swing
the printer while carrying it by the handle.
Extending the handle
Make sure to bring the following items with you:
●
Paper
● Power cord
● The HP Photosmart 420 series GoGo Photo Studio digital camera
● Extra print cartridges (if you plan to print a lot)
● Optional printer accessories you plan to use, such as the battery or HP Bluetooth
wireless printer adapter
● If you are going to connect the printer to a computer, bring the USB cable and
HP Photosmart software CD
Note If you do not take the documentation with you, be sure to write down the
correct pen numbers for the country/region you plan to visit or purchase
enough print cartridges before you go.
Chapter 4
34 HP Photosmart 420 series GoGo Photo Studio