Removing a remote enclosure – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 31
Advertising
Domain management 31
Virtual Connect Manager imports the enclosure and provides status information.
Removing a remote enclosure
To remove a remote enclosure, disassociate all profiles, networks, port sets, and port monitors from the
enclosure. If the enclosure is currently in a No-COMM state, the remote enclosure remains in VC Mode. Take
the enclosure out of VC mode manually with the OA command line for that enclosure.
To remove a remote enclosure:
1.
Go to the Domain Settings (Domain Enclosures) screen (on page
2.
Select the checkbox next to the enclosure to be removed.
3.
Click Delete.
Advertising
This manual is related to the following products: