HP Storage Mirroring V5 Software User Manual
Page 152
19
-
6
79
Memory freed to bring Storage Mirroring
memory usage below the limit
Data in the source queue has been sent to the target machine,
bringing the pagefile below its limit.
80
Trying to auto-retransmit to
ip://xxx.xxx.xxx.xxx
Storage Mirroring is attempting to automatically reconnect
previously established source and target connections after a
server reboot or auto-disconnect. This is also referred to as the
auto-reconnect process.
81
Schedule transmit start to target
A scheduled transmission of data from a source machine to a
target machine has started. See the description in the Message
column in the LogViewer file.
82
Schedule transmit end to target
A scheduled transmission of data from a source machine to a
target machine has ended. See the description in the Message
column in the LogViewer file.
85
repset has been auto-disconnected
Storage Mirroring automatically disconnects the source and
target connection because the queue size has reached a
specified size for this action.
87
Start replication on connection con_id
Data has started replicating from a source machine to a target
machine.
88
Stop replication on connection con_id
Data has stopped replicating from a source machine to a target
machine.
89
Mirror started con_id
Data is being mirrored from a source machine to a target
machine.
90
Mirror stopped con_id
The process of mirroring data from a source machine to a
target machine has stopped due to user intervention or an
auto-disconnect. (This means the mirroring process was not
completed.)
91
Mirror paused con_id
The process of mirroring data from a source machine to a
target machine has paused because the target machine cannot
write the data to disk fast enough. Storage Mirroring will
resolve this issue on its own by transmitting the data in queue
when the target catches up.
92
Mirror resumed con_id
The process of mirroring data from a source machine to a
target machine has resumed.
93
Mirror ended con_id
The process of mirroring data from a source machine to a
target machine has ended.
94
Verification started con_id
The verification process of confirming that the Storage
Mirroring data on the target is identical to the data on the
source has started.
95
Verification ended con_id
The verification process of confirming that the Storage
Mirroring data on the target is identical to the data on the
source has ended.
97
Restore started con_id
The restoration process of copying the up-to-date data from
the target back to the original source machine has started.
98
Restore completed con_id
The restoration process of copying the up-to-date data from
the target back to the original source machine has been
completed.
99
RepSet Modified: repset_ name
This message means that the specified replication set has been
modified.
100
Failover condition has been met and user
intervention is required
Storage Mirroring has determined that the source has failed,
and requires manual intervention to start the failover process.
101
Failover in progress!!!
The conditions for failover to occur have been met, and the
failover process has started.
ID
Message
Description