Display and group management, Making a group – HP LD5535 55-inch LED Digital Signage Display User Manual
Page 15
A display connected via serial communication must have an ID assigned. HP Network Sign Manager uses this
ID to communicate with the display connected to the computer using the serial cable. To control a display,
select an ID of the display that you wish to control in the Monitor Register Window pane.
NOTE:
If you select Monitor 0 in the Monitor Register Window pane, you can control all displays regardless
of the IDs. However, controlling all displays by selecting Monitor 0 prevents you from receiving
acknowledgement (ACK) data from the displays.
Display and group management
HP Network Sign Manager supports grouping and managing the displays added in the Monitor Register
Window pane.
Making a group
The following describes how to create a display group:
1.
Right-click the Group node in the Monitor Register Window pane.
2.
Click Make Group. The Make Group dialog appears.
Display and group management
9