Osd enable/disable, Configuring audio/video settings, Picture mode – HP LD5535 55-inch LED Digital Signage Display User Manual
Page 23: Backlight, Picture mode backlight
OSD Enable/Disable
OSD Enable/Disable is used to turn on or off the OSD (on-screen display) of the display. Set to OSD Disable
to remove the appearance of the OSD from the screen.
NOTE:
You cannot configure the screen settings with a remote control or key operations of the display
when OSD Disable is set to Off.
Configuring audio/video settings
You can change the audio and video settings of the selected display in the A/V tab.
NOTE:
Screen image content varies based on model.
NOTE:
Audio/video setting options might vary depending on the display model.
Picture Mode
Picture Mode is used to set the screen mode.
NOTE:
Changing this setting will invalidate the color calibration on select models.
Backlight
Backlight is used to adjust the position of the slider between 0 and 100 to set the brightness of the screen
backlight.
NOTE:
Changing this setting will invalidate the color calibration on select models.
Display configuration
17