HP StorageWorks 2.64 Director Switch - Manual (Page 160)

Error Messages
160 Embedded Web Server User Guide
Error 72: No Backup FRU The FRU cannot be
swapped because a
backup FRU is not
installed.
Insert a backup FRU and
resubmit the request or
consult the installation or
service manual for this
product for appropriate
action.
Error 73: Port Not
Installed
The port specified is not
installed on this product.
Consult the
installation/service
manual on installing a
port optic.
Error 74: Invalid Number
of Zones
The specified zone set
contains less than one
zone or more than the
maximum number of
zones allowed for this
product.
A zone set must contain
at least one zone to be
considered valid. Add or
remove zones
accordingly to meet
specified requirements.
Error 75: Invalid Zone Set
Size
The zone set entered
exceeds switch NVRAM
limitations.
Reduce the size of the
zone set to meet specified
requirements. This can be
a reduction in the number
of zones in the zone set,
a reduction of members
in a zone, or a reduction
of zone name lengths.
Error 76: Invalid Number
of Unique Zone Members
The zone entered
contains more than the
maximum number of
zone members allowed
per zone set for this
product.
Reduce the number of
members in one or more
zones and resubmit the
command.
Error 77: Not Allowed
While Port Is Failed
The port selected is in a
failed or inactive state, or
is in need of service.
Consult the
installation/service
manual for appropriate
action.
Error 78: System Error
Light On
This unit is not able to
beacon because the
system error light is on.
You must clear the system
error light before unit
beaconing may be
enabled. Consult the
installation/service
manual for appropriate
action.
Table 9: Embedded Web Server Messages (Continued)
Message Description Action