HP Tape Library Interface Manager Software - Manual (Page 18)

18 Introduction Chapter 1
Table 2 Supplied Components
No. Item Qty Description
1 HP Surestore Interface Manager 1 Base Product: Chassis, Interface Manager controller,
remote management card, power supply and three fans
2 Mounting rails 2 Left and right mounting rails
3 Mounting rail extensions 2 Used for the 10/180 tape library only
4 Hardware identification board 1 Hardware consisting of:
6 - 10x32 hex nuts
12 - sheet metal nuts
16 - 10x32 x 50 machine screws
5 Flush mount brackets 2 Left and right flush mount brackets
6 Cable labeling kit 1 Label kit to label the SCSI and fibre cables
7 Power distribution unit 1 Power distribution unit
8 HP Surestore Interface Manager
Installation and Cabling Poster
1 Installation and Cabling Poster
9 HP Surestore Interface Manager
User’s Guide
1 User’s Guide
10 Serial cable 1 Serial cable
11 Power cord 1 power cord (PDU to the Interface Manager)
12 SCSI cable 1 2.5 meter FC SCSI cable for daisy chaining the robotics to
a drive - High Density - Do not use with the Interface
Manager
13 Localized power cord 1 Localized power cord (wall to PDU)