HP RDX Removable Disk Backup System - Manual (Page 18)

2. Push the cartridge gently into the unit until it locks into place with a clicking sound.
Figure 13 Inserting a cartridge
2. keyed corner 1. write protect tab
Removing cartridges
NOTE: For the eject function to operate correctly, the HP RDX utility should be installed immediately
after installation. See Install the RDX utility (page 16) .
There are two ways to eject a cartridge under normal operation.
If the eject function does not operate correctly, see Emergency eject (page 22) .
Unload using the mouse right-click method (Windows™ only)
1. Locate the drive letter for the device in Windows Explorer.
2. Right click on the device and select Eject.
3. The RDX Removable Disk Backup System completes any task it is currently performing and
ejects the cartridge. When the cartridge has been ejected by the unit, grasp the exposed sides
of the cartridge and pull it straight out.
18 Operating your RDX Removable Disk Backup System