HP StoreEver MSL Tape Libraries User Manual
Page 22
NOTE:
This option is only selectable when a token is inserted in the rear USB port of the
base module. Click Refresh to update the displayed key manager options.
3.
Navigate to the Configuration > Encryption > USB - MSL Encryption Kit screen. If requested,
enter the Token PIN, and then click Submit.
4.
Click Enable in the Enable/Disable Encryption area to enable encryption for one or more
partitions. Partitions that do not contain an LTO-4 or later generation tape drive will not appear
on the configuration screen.
Figure 12 Enable/Disable Encryption area
5.
Enter the name of the token in the Token Name field. The name can have up to 126 characters.
TIP:
Using a descriptive name, including the dates when the keys on the token were used,
could be helpful if your log of tapes written with keys on the token is lost.
6.
Click Submit to apply your selections.
7.
Generate the first key. By default, you must manually request the key server token to generate
a new key. Click Apply in the Key Management area to generate the first key.
22
Installing and configuring the encryption kit