HP ProLiant DL760 G2 Server - Manual (Page 134)

Installing Hardware Options, Hot-Pluggable
f. The system will rebuild and verify the data on the DIMMs in the memory
cartridge as the cartridge power LEDs are blinking. This process is complete
when the cartridge power LED is illuminated solid green, and the cartridge is
online.
g. Memory cartridge 1 is online but the newly installed memory has not been
activated. The DIMM status LEDs for the newly installed DIMMs will be
blinking.
IMPORTANT: The memory cartridge power LED must be illuminated solid before you
can unlock the next memory cartridge.
2. Repeat step 1 with memory cartridges 2, 3, 4, and 5.
Memory cartridges 2, 3, 4, and 5 will not come online unless their memory
configurations match cartridge 1.
3. After cartridge 5 is online, the newly added memory can be made available to the
operating system.
By default, the additional memory is made available to the system immediately
after memory cartridge 5 comes online.
IMPORTANT: Do not unlock any of the memory cartridges while one or all of the memory
cartridges are rebuilding.
4. The DIMM status LEDs should go off.
5. All five memory cartridge power LEDs will blink as the memory is made
available to the operating system. This process is complete when all five memory
cartridge power LEDs stop blinking and illuminate solid green.
The hot-add is complete and normal server operation can resume.
HP ProLiant DL760 Generation 2 Server User Guide 5-19
HP CONFIDENTIAL
Writer: Bryce Miller File Name: f-ch5 Installing Options-Hot Pluggable.doc
Codename: Comet Part Number: 201264-001 Last Saved On: 6/17/03 9:47 AM