HP 3PAR Application Software Suite for Oracle User Manual
Page 65
4.15
Setting Up SSH Connections for Recovery Manager
Recovery Manager 3.0.3/3.0.4 for Oracle User’s Guide
4.3.9 Setting Up Connections from the Backup Host to the InServ Storage
Server
Set up an SSH connection from the backup host to the InServ Storage Server as follows:
1
Log in to the backup host as root user.
2
Make sure the SSH key pair exists as follows:
3
Create a CLI user on the InServ Storage Server to be used by 3PAR Recovery Manager to
access the InServ Storage Server from the backup host. Skip this step if you wish to use an
existing user.
In the example above:
◆
<adm_user>
is the user name of the InServ Storage Server’s administrator.
◆
<ss_name>
is the system name of the InServ Storage Server attached to the backup
host.
◆
<adm_password>
is the administrator's password.
◆
<password>
is the password (for the InServ Storage Server) for the CLI user being
created.
◆
<username>
is the user being created.
For details about the
createuser
command, refer to the InForm OS Command Line
Interface Reference.
<backup_host> # ls ~/.ssh
id_rsa id_rsa.pub authorized_keys known_hosts
<backup_host># ssh <adm_user>@<ss_name>
<adm_user>'s password: <adm_password>
cli% createuser -c <password> <username> all edit