HP ProLiant DL585 Server - Manual (Page 150)

System LEDs and switches
E-14 HP ProLiant DL585 Server User Guide
Table E-10: QuickFind diagnostic display LEDs continued
Item Description Status Action
8 Therm trip Off = Normal
On = Attention required
The server experienced a thermal
shutdown.
If one of the CPU thermal LEDs is amber,
that CPU experienced an overtemperature
condition.
•
Be sure that the
processor heatsink is properly
attached. For more information, refer
to the maintenance and service guide.
•
Be sure the correct
DIMMs (1.2-inch) are installed.
•
Be sure all fans are
installed and working properly
9 SCSI interlock Off = Normal
On = Attention required
Ensure the SCSI backplane is installed
properly.
Reseat SCSI backplane board and hard
drives.
10 Power supply 1 Off = Normal
On = Attention required
Look at the LEDs on the front of the power
supply and take the appropriate action.
11 Power supply 2 Off = Normal
On = Attention required
Look at the LEDs on the front of the power
supply and take the appropriate action.
12 Bus error Off = Normal
On = Attention required
A bus error occurred.
The error might have been caused by one
of the adapter cards on this bus (see amber
LEDs for which slots might have caused
the error).
Reseat the adapter cards.
If problem persists, remove or replace one
or both of the cards.