Hp systems insight manager, Management agents, Usb support and functionality – HP ProLiant DL320 G5p Server User Manual

Page 61: Usb support, Internal usb functionality

Advertising
background image

Configuration and utilities 61

HP Systems Insight Manager

HP SIM is a web-based application that allows system administrators to accomplish normal administrative

tasks from any remote location, using a web browser. HP SIM provides device management capabilities

that consolidate and integrate management data from HP and third-party devices.

IMPORTANT:

You must install and use HP SIM to benefit from the Pre-Failure Warranty for

processors, SAS and SATA hard drives, and memory modules.

For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or

the HP SIM website (

http://www.hp.com/go/hpsim

).

Management Agents

Management Agents provide the information to enable fault, performance, and configuration

management. The agents allow easy manageability of the server through HP SIM software, and third-

party SNMP management platforms. Management Agents are installed with every SmartStart assisted

installation or can be installed through the HP PSP. The Systems Management homepage provides status
and direct access to in-depth subsystem information by accessing data reported through the Management

Agents. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation

Pack or the HP website (

http://www.hp.com/servers/manage

).

USB support and functionality

USB support (on page

61

)

Internal USB functionality (on page

61

)

USB support

HP provides both standard USB support and legacy USB support. Standard support is provided by the
operating system through the appropriate USB device drivers. HP provides support for USB devices before

the operating system loads through legacy USB support, which is enabled by default in the system ROM.

HP hardware supports USB version 1.1 or 2.0, depending on the version of the hardware.
Legacy USB support provides USB functionality in environments where USB support is normally not

available. Specifically, HP provides legacy USB functionality for:

POST

RBSU

Diagnostics

DOS

Operating environments which do not provide native USB support

For more information on ProLiant USB support, refer to the HP website
(

http://h18004.www1.hp.com/products/servers/platforms/usb-support.html

).

Internal USB functionality

An internal USB connector is available for use with USB drive keys only. The internal connector shares the

same bus with the front external USB connector, and connecting a device to both the front internal and

Advertising