AKG Acoustics CS 5 - Manual (Page 46)

Section 9: Specifications
9.2 CS 5 DU/VU
9.2.1 General
9.2.2 Connector Pinouts
CS 5 User Manual - 46 -
Minimum Nominal Maximum Unit
Power Supply
Supply voltage
46 48 50 V
Power consumption - 1.5 3 W
Headphone Output
Power
- 30 60 mW
Load impedance 8 32 - ohms
Frequency range (-3 dB) 45 - 22k Hz
Physical Dimensions
Signal/noise ratio
70 - - dB
Width 10.1/257 in./mm
Depth 5.8/147 in./mm
Height 1.9/73 in./mm
HEADPHONE
1/4" TRS jack*
Pin no. Function
Tip Right
Ring Left
Sleeve Ground
SYSTEM
8-pin RJ45
Pin no. Function
1 Data send +
2 Data send -
3 Data receive +
4 48 VDC
5 48 VDC
6 Data receive -
7 Ground
8 Ground
* Use stereo headphones with TRS plugs only. Connecting a TS plug would short the ring contact to ground
and damage the device.