Check paper, Check product, Step 2: check the ink levels – HP Deskjet D5560 Printer User Manual

Page 45

Advertising
background image

If this did not solve the issue, try the next solution.

Step 2: Check the ink levels

Solution: Check the estimated ink levels in the cartridges.

NOTE:

Ink level warnings and indicators provide estimates for planning

purposes only. When you receive a low-ink warning message, consider having a
replacement cartridge available to avoid possible printing delays. You do not need
to replace the cartridges until print quality becomes unacceptable.

For more information, see:

Check the estimated ink levels

Cause: The ink cartridges might have insufficient ink.

If this did not solve the issue, try the next solution.

Check paper

Try the following solutions.

Step 1: Make sure only one type of paper is loaded

Step 2: Load the stack of paper correctly

Step 1: Make sure only one type of paper is loaded

Solution: Load only one type of paper at a time.
Cause: More than one type of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.

Step 2: Load the stack of paper correctly

Solution: Remove the stack of paper from the input tray, reload the paper, and then
slide the paper width guide inward until it stops at the edge of the paper.
For more information, see:

Load media

Cause: The paper-width guide was not positioned correctly.

Check product

Try the following solutions.

Solution 1: Align the print cartridges

Solution 2: Automatically clean the print cartridges.

Print troubleshooting

43

Solve a problem

Advertising