HP XP P9500 Storage - Manual (Page 172)

Description Item
• The second line shows the device emulation type.
•
The third line shows the volume capacity.
• A device ID ending in X (for example, 00:00:3C X) indicates the LDEV is a Thin Provisioning
Z virtual volume.
•
A device ID ending in # (for example, 00:00:3C #) indicates the LDEV is an external
volume.
• If there is no volume in the local system, the S-VOL’s port ID, GID, and LUN display. Do
not change or delete this information.
•
“00” appears for the LDKC number if the volume is a XP24000/XP20000 Disk Array
volume.
• For volumes shared with Business Copy Z or Continuous Access Synchronous Z, only the
Cnt Ac-J pair status is shown. To see the BC Z or Cnt Ac-S Z pair status, you must open
those program products in Remote Web Console.
•
If the delta resync pair in a 3 Cnt Ac-J DC multi-target configuration displays, information
for S-VOL displays in the PVOL ( Port-GID-LUN) field.
The CLPR number and name of the volume in the local system. CLPR
Master journal. For a delta resync pair in a 3 Cnt Ac-J DC multi-target configuration, information
for the remote journal displays in the M-Journal field. A journal number ending in [M] indicates
the journal can be used in a 3 Cnt Ac-J Z DC configuration; for example, 001 [M]. M-Journal
Restore journal. A journal number ending in [M] indicates the journal can be used in a 3 Cnt
Ac-J Z DC configuration; for example, 001 [M]. R-Journal
The pair’s mirror ID Mirror ID
Number of the consistency group for the pair. If a consistency group is not used, this field is
blank. CT Group
Secondary system’s 5-digit serial number and controller ID. S/N (CTRL ID)
The channel type of the path interface between storage systems. In the current version, all
channel types are displayed as Fiber. Path Type, ID
The ID refers to the path group ID, which is set at DKC registration. The ID displays with "*"
and 2-digit-hexadecimal notation (01 to FF), or "Default”.
The scheduling order for initial copy operations. The value can be within a range of 0 to
256. This is disabled when the status becomes PAIR. Initial Copy Priority
Options for copying or not copying cache fast write data to the S-VOL. CFW
•
Only P-VOL: Does not copy cache fast write data to the S-VOL.
• Copy to S-VOL: Copies cache fast write data to the S-VOL.
The default is Only P-VOL.
Settings used for splitting a pair when a failure occurs. The default is Mirror. Error Level
•
Mirror: All pairs in the mirror are split when a failure occurs.
•
LU: Only the pair is split when a failure occurs.
Indicates whether write I/O to the S-VOL is enabled or disabled. S-VOL Write
•
Enabled—the write operation to the S-VOL is allowed. This setting is allowed only when
the pair is split. If the S-VOL is the production volume and write I/O data from the host
has been received, Enabled(Received) appears. If the write I/O data has not been received
by the volume, Enabled(Not Received) appears. In the 3 Cnt Ac-J DC multi-target or cascade
172 GUI reference