Defining copy pairs, Changing the status of a copy pair, 117 changing the status of a copy pair – HP XP P9000 Command View Advanced Edition Software Licenses User Manual
Page 117
2.
From the Explorer menu select Resources and then Storage Systems.
3.
Expand the tree and select the desired storage system.
4.
Click the Open link and then on the Cmd Devs tab click the pencil and paper icon and edit the
command device.
5.
Follow the instructions in the window to edit the command device.
The edited command device can be viewed by clicking the Open link from the storage system name
in Replication Manager. The list of edited command devices are displayed in the Cmd Devs tab.
Related topics
• Changing the status of a copy pair
• Copy pair management operations
Defining copy pairs
Before you define copy pairs, determine the volumes that will be used to define copy pairs and verify
that the volumes are allocated to a host.
1.
From the Actions menu, select Manage Replication to start Replication Manager.
2.
Display a list of volumes from the Hosts tree or the Storage Systems tree.
3.
On the Unpaired tab, select the volumes from which copy pairs will be defined and click Pair
Management.
The Pair Configuration wizard opens.
4.
Follow the steps in the Pair Configuration wizard to define copy pairs.
For details about how to specify copy-pair conditions and how to use the Pair Configuration
wizard, see the Replication Manager online help.
5.
From the Explorer menu, select Tasks, and then select Tasks again to confirm that the task was
properly executed.
6.
Confirm the copy-pair definitions in the Pair Configurations or Storage Systems view in Replication
Manager.
From the list of volumes associated with Hosts tree or Storage Systems, view the current copy
pair status.
TIP:
To display the most recent SplitTime in Device Manager after performing operations on a
Snapshot or Fast Snap copy pair, you need to refresh the storage system information.
Related topics
• Copy pair management operations
Changing the status of a copy pair
You can change the status of a copy pair.
User Guide
117