Creating resource groups, Editing a resource group, 195 editing a resource group – HP XP P9000 Command View Advanced Edition Software Licenses User Manual
Page 195
Related topics
• Assigning resource groups and roles to a user group
Creating resource groups
Resource groups, which are user defined, can be created for the HP P9500 .
1.
On the Administration tab, in the Administration pane, select Resource Groups.
2.
Click Create Resource Group.
3.
Enter a name and description, and select the storage system providing the resources.
4.
Using the tabs, specify the parity groups, LDEVs, ports, or host groups (or a mix of resources) for
the resource group.
5.
When done, click OK.
The new resource group is displayed, and can be assigned to an existing user group using the Edit
User Group button. You can also assign resource groups when creating new user groups with Create
User Group.
TIP:
To delete resource groups, select one or more resource groups and click Delete Resource Groups.
Related topics
• Prerequisites for creating resource groups
• Assigning resource groups and roles to a user group
Editing a resource group
Information about resource groups can be modified to reflect changing access control requirements.
1.
On the Administration tab, in the Administration pane, select Resource Groups.
2.
From the Resource Groups pane, select the resource group, and click Edit Resource Group.
Alternatively, if you click the resource group link, click Actions and select Edit Resource Group.
3.
You can modify the resource group name and description, but not the storage system.
4.
Modify the parity groups, LDEVs, ports, or host groups to reflect your access control requirements.
5.
When done, click OK.
Depending on how you initiated your edit (see step 2), the resource group is displayed and you can
confirm your changes, or you will be in the Resource Groups pane and can click the resource group
link to confirm your changes.
User Guide
195