HP Netserver L Server series - Manual (Page 141)

Chapter 6 Maintenance Processes
135
5. Navigate to and select the image filename.
6. Click Open in the Open image file dialog box.
Once you’ve specified an appropriate image file, the Apply button is
armed in the Flash Utility dialog box and the Flash file selection area
displays details regarding the .IMA file. See Figure 6-12.
Figure 6-12. Additional Flash File Information
7. Compare the information for the new .IMA file with the current
information to confirm a flash update is warranted.
For example, the current .IMA contains a newer version of code than the
update version. HP recommends keeping a running log of Flash Updates
by including all the information under Firmware Image information.
CAUTION Flashing new code to the controller erases the current
contents; therefore, confirmation is required to proceed with
the flash. See Figure 6-13.
8. Click the Apply button in the Flash Utility dialog box.