HP Integrity NonStop J-Series User Manual
Page 161
NonStop AutoTMF Commands
HP NonStop AutoTMF Software User’s Guide—429952-016
6-85
TRACE
trace-index
a value from 0 to 31 to assign an index to the trace operation.
If trace-index is omitted, the runtime assumes trace-index 0.
When STOP is specified, trace-index may be entered as “*, to stop all active
traces.
When a user is allocated a trace index, the user owns the entry until the trace
expires or is stopped. Only that user (or super) can stop the trace.
traced-entity
EXEC[UTION]
Trace the following information:
Enscribe calls such as KEYPOSITION, READ, WRITE intercepted by the
AutoTMF runtime library.
The startup message.
PARAMS and ASSIGNs passed to the process.
DEFINEs active when the process started.
Each entry is timestamped and contains the name (or CPU, PIN) of the calling
process.
DATA
option is
{ CLEAR
}
{
}
{ DEBUG { TERM term-name | MYTERM }}
{
}
{ EDIT
}
{
}
{ EXT 1-to-65535
}
{
}
{ FOR n
}
{
}
{ MAXEXTENTS 16-to-978
}
{
}
{ MAXFILESIZE
}
{
}
{ PROTECTED
}
{
}
{ SEPARATE
}
{
}
{ TRANSID
}