HP StorageWorks XP Remote Web Console Software - Manual (Page 68)

Description Item
: SMPL. The volume is not currently assigned to an XP Continuous
Access pair. When the initial copy is started by a paircreate operation,
the volume status changes to COPY.
Status
: COPY. The XP Continuous Access initial copy operation is in
progress. Data on the pair is not fully identical. When the initial copy is
complete, the status will change to PAIR.
: PAIR. The volume is currently assigned to an XP Continuous Access
pair, and the pair is synchronized. All updates from the host to the P-VOL
are duplicated at the S-VOL.
: PSUE. The pair has been suspended by the MCU or RCU due to an
error condition. The volumes in this pair are not synchronized.
: PSUS. The pair has been split by the user (pairsplit-r), or the pair
has been released by the user from the RCU (pairsplit-S). The volumes in
this pair are not synchronized.
: SSWS. The pair has suspended and the S-VOL is able to accept
write commands from a host.
: PDUB. This XP Continuous Access LUSE pair is in the COPY or PAIR
state, but at least one LDEV pair within the XP Continuous Access LUSE
pair is in the SMPL or PSUE state.
If the status is changed to PDUB during the process of pair release, only
VOL and Status are displayed in the list.
: Suspending. XP Continuous Access Asynchronous only. This pair is
not synchronized. This pair is in transition from the PAIR or COPY state
to the PSUS/PSUE state.
: Deleting. XP Continuous Access Asynchronous only. This pair is not
synchronized. This pair is in transition from the PAIR, COPY, or
PSUS/PSUE state to the SMPL state.
Suspend Sub Status
• Grp: Update consistency of the volume is the same as the consistency
group.
•
LU: Update consistency of the volume is not the same as the consistency
group.
• OFF: Suspended by the PS OFF by the MCU.
Sub
S/N of the other system (MCU or RCU) of the pair. S/N
SSID of the other storage system (MCU or RCU) of the pair, or path group
ID that you entered at RCU registration. ID
Displays the port number, host group number, and LU number
(LDKC:CU:LDEV) of the remote volume in this order. These numbers are
separated by hyphens.
Paired VOL displays the port number, the host group number, and LUN
of the volume that you specified in the remote storage system when
creating the pair. If you change or delete the port number, the host group
number, or LUN of the volume in the remote storage system, incorrect
information is displayed in the Paired VOL field until it is refreshed.
Paired VOL
Pair mode: Synchronous, Synchronous-C, or Asynchronous. Synchronous-C
means the Synchronous pair on which the consistency group is specified. Type
68 Using the XP Continuous Access GUI