HP Officejet Pro X551 Printer series - Manual (Page 52)

Manually connect the product to a wireless network
During the first 120 minutes of product setup, or after resetting the product's network defaults (and
without a network cable attached to the product), the product's wireless radio will broadcast a wireless
setup network for the product.
The name of this network is “HP-Setup-xx-[product name]”.
NOTE: The “xx” in the network is name is the last two characters of the product's MAC address. The
product name will be either HP Officejet Pro X451 Series or HP Officejet Pro X551 Series.
1. From a wireless enabled product, connect to the setup network for the device.
2. Open a web browser while connected to this setup network, and open the HP Embedded Web
Server (HP EWS) using the following IP address:
● 192.168.223.1
3. Find the Wireless Setup Wizard in the product's EWS and follow the on screen instructions to
manually connect the product.
NOTE: The product uses Automatic DHCP by default.
38 Chapter 3 Connect the product ENWW