HP XP External Storage Software - Manual (Page 72)

• Emulation Type: emulation type of the external volume that you configured when you mapped
the external volume.
• LDEV: LDKC:CU:LDEV number which is assigned to the external volume.
• Number of LDEVs: number of LDEVs which are actually created in the external volume.
• SLPR/CLPR: SLPR, and CLPR which is used to access the external volume. This is displayed
when the cache memory is partitioned using Disk/Cache Partition.
• Cache Mode: displays whether the write data from the host to the external storage system is
propagated synchronously (Disable) or asynchronously (Enable).
• Inflow Control: displays if the writing operation to the cache memory is stopped (Enable) or
continued (Disable) when the writing operation to the external volume is impossible.
• Path Mode: indicates how the cross-subsystem paths work.
• Device: product name that is reported to the host by the external volume.
• Ext. VOL Info: information about the external volume.
• Capacity (blocks): capacity of the external volume in Blocks.
• Characteristic2: extended identification number of the external volume.
• OK button
Saves the settings and closes the dialog box.
• Cancel button
Cancels the settings and closes the dialog box.
• Pop-up Menu
Right-click a row in the Add Volume dialog box to perform the following operations from the
pop-up menu.
Table 15 Pop-up Menu in the Add Volume dialog box
Pop-up menu Reference Description
Set External Volume
Parameter
Section Set External
Volume Parameter
Dialog Box on page
72.
Displays the Set External Volume Parameter dialog box.
This dialog box allows you to set the parameters.
LDEV Mapping (Auto)
Section LDEV
Mapping (Auto)
Dialog Box on
page 74.
Displays the LDEV Mapping (Auto) dialog box. This
dialog box allows you to specify the LDEV number to
the first LDEV in the external volume.
LDEV Mapping
(Manual)
Section LDEV
Mapping (Manual)
Dialog Box . on
page 75
Displays the LDEV Mapping (Manual) dialog box. This
dialog box allows you to specify the LDEV number to
all the LDEVs in the external volume.
Delete N/A
Allows you to delete the external volume from the Add
Volume dialog box.
Set External Volume Parameter Dialog Box
The Set External Volume Parameter dialog box allows you to set the external volume parameter. The Set
External Volume Parameter dialog box is displayed when you right-click the external volume in the Add
Volume dialog box and click the Set External Volume Parameter in the pop-up menu.
72 Performing External Storage Operations