Autopath paths device – HP StorageWorks Auto Path VA Software User Manual
Page 63
Advertising
autopath paths device
Command-line interface
63
autopath paths device
Display paths to device
Description
The autopath paths device command displays the paths to the selected
device referenced by the device number.
Syntax
autopath paths device=device_number
device_number
The Auto Path index number shown in the autopath
devices command line display.
Example
The device for this example has a defined load balancing policy.
HP Auto Path> autopath paths device=1
Device Name: HP OPEN-3
Device Serial Number: 0400756000E2
Path# Controller Port# State Scsi Port# Bus# TID Lun#
-------------------------------------------------------------------------
1 6 Active 3 4 0 0
2 22 Active 3 4 1 0
Advertising