HP Deskjet 6840 Color Inkjet Printer - Manual (Page 89)

Use the What's This? help to learn about the features that you see in the Printer
Properties dialog box.
7.9 Labels
Guidelines
• Use only labels that are designed specifically for inkjet printers.
• Use only full sheets of labels.
• Verify that the labels are not sticky, wrinkled, or pulling away from the protective
backing.
• Do not exceed the In-tray capacity: up to 30 sheets of labels (use only letter-
size or A4-size sheets).
Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, and then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-
length guide.
4. Fan the edges of the label sheets to separate them, and then align the edges.
5. Place the label sheets in the In tray with the label side facing down. Push the
sheets into the printer until they stop.
6. Slide the paper guides firmly against the edge of the sheets.
7. Lower the Out tray.
Printing
Note: If your software program includes a label printing feature, follow the
instructions that are provided with the software program. Otherwise, follow
the instructions below.
1. Open the Printer Properties dialog box.
HP Deskjet 6800 series printer
89